Homes in Heber ask more of their electrical systems than they did a generation ago. A panel that handled a household's load comfortably for decades can run short of capacity the moment an EV charger, a heat tape circuit, or a high-draw appliance enters the picture. That gap between what a system was built for and what it is now being asked to do is where most of the calls we receive start.
We handle electrical repairs, panel upgrades, wiring, lighting, generator hookups, and the full range of residential and commercial electrical work across Heber and Wasatch County. When you call, a real person answers, walks through the job with you, and confirms the price before anything is scheduled.
Call (385) 452-6995 to get started.
Some electrical work is straightforward to reach. Some is not. Attics with low clearance, crawl spaces with limited access, vaulted ceilings that require more than a standard ladder, and finished walls that conceal the wiring behind them all change how a job is planned before anyone picks up a tool.
The planning conversation happens on the phone. When you describe the space, we ask the questions that help us understand what the access situation looks like and what the job will actually involve. A ceiling fan installation in a room with a flat ceiling and existing wiring is a different scope than the same fan in a vaulted space with no switch leg above it. Load calculations and circuit routing both depend on understanding the structure, not just the symptom.
When electrical work is finished, what gets documented matters as much as what gets fixed. Every circuit that is added, modified, or tested should be labeled at the panel so the next person who opens it knows what they are looking at. That is true whether the next person is a home inspector, a future owner, or a tenant moving in.
We confirm labeling and test every circuit we touch before the visit closes. For larger jobs, that means a written record of what was done, what was found, and what the system can now carry. A property that has been worked on and documented correctly is a property that holds up when it changes hands.
Renovations and additions involve more than one trade, and the order matters. Rough-in electrical work has to happen before insulation, before drywall, and in some cases before the framing is fully closed. When the electrician is scheduled after those stages, the work becomes significantly more involved and the cost reflects it.
The same applies to dedicated circuits for appliances, heating equipment, or workshop tools that are being added as part of a build-out. Running a circuit while walls are open is a different job than chasing one through finished space. We ask about the project timeline on the call so the electrical scope fits the sequence rather than working around it.
If a renovation involves aluminum wiring that gets exposed during the work, that is also the right time to address connections and devices rather than closing the wall back over them. Aluminum-wiring remediation done during a build-out costs less and causes less disruption than returning to it later. What the work involves is covered on the electrical service list.
Grounding and bonding issues rarely announce themselves with a tripped breaker or a dead outlet. They show up on an inspection report, or when a surge protection device is being installed and the grounding quality turns out to affect how well it performs. Older homes in this area are where we find most of these corrections. The fix depends on what the existing system has and what it is missing.
Exterior lighting work comes up when a property adds security lights, replaces a fixture that failed over winter, or extends lighting to a detached structure or a driveway. Every outdoor installation requires weatherproof boxes, correct conduit or direct-burial cable, and GFCI protection at the source. We confirm that the circuit is rated for the location before the job closes.
A staircase with a switch at each end, a hallway that can be controlled from either side of the house, or a large room where a single switch location is not practical are all situations that call for three-way or multi-location switching. The wiring is more involved than a standard switch replacement, and the planning depends on what is already in the wall. We scope it on the call.
GFCI protection is required in kitchens, bathrooms, garages, crawl spaces, and all exterior locations. AFCI protection applies to bedroom circuits and, in newer construction, to most living-space circuits as well. Homes that have not had electrical work done in a long time often lack both in all the places current code requires. We confirm what is in place and what needs to be added as part of any outlet or circuit work.
A full rewire is the right answer when knob-and-tube wiring runs through most of the house, when aluminum branch-circuit wiring is present across multiple circuits, or when a renovation exposes wiring that cannot be brought to current standards without replacing it. Partial rewiring addresses a specific area or circuit run without touching the rest of the system. We determine which applies during the diagnostic visit, and the scope is confirmed before any work begins.
For planned work, appointments are arranged on the call. We go through the job, confirm the scope, confirm the price, and set the visit. We are available every day from 6:30 AM to 10:00 PM, which covers most situations that come up during the day and into the evening.
For problems that will not keep, the same number reaches us during those hours. A panel that is buzzing and warm, an outlet that sparked and stopped working, or a loss of power to part of the house after a storm are all situations that call for prompt attention. Describe what you are seeing and we will tell you how to proceed.
For rental properties and businesses that have to stay open, we work around the schedule. The person who answers the phone can tell you what the visit involves, and we plan the timing to minimize disruption to whoever is on the property. Call in the morning. Talk it through. Know the options by the end of the call.
The price is confirmed on the call, based on what the job involves. We ask about the symptom, the location, and the existing system so the number you get reflects the actual scope rather than a range that could mean anything.
What moves a quote is the specifics of the job. The fault that turns out to be deeper in the wiring than it first appeared. The circuit that needs the panel opened and the load recalculated before an answer is possible. The existing wiring that cannot carry the change being planned without an upgrade first. We tell you on the call what is known and what would change the figure if the job opens up.
If something unexpected comes up once work is underway, we talk through the updated scope and price before continuing. Nothing moves forward without your agreement.
We cover Heber and the communities nearby throughout Wasatch County. That includes Midway, Interlaken, Daniel, Charleston, and Hideout. Whether the property is a single-family home, a rental, or a commercial building, the work is scoped the same way: confirmed on the call, priced before the visit, and completed to the code that applies here.
If your address is outside Heber and you are not certain whether it falls within the service area, ask on the call.
Permit requirements depend on the type and scope of the work. Larger jobs such as panel replacements and new circuit runs typically require a permit, while straightforward repairs often do not. We confirm what applies to your specific job on the call and factor any required inspections into the schedule so the work is not left in a state that cannot be closed out.
Cold-season electrical problems in this region tend to center on heat tape circuits that have been running continuously, panels that were pushed hard by heating loads, and exterior fixtures that took in moisture during freeze-thaw cycles. Generator transfer switches also get attention after a multi-day outage. If you noticed something during or after the winter and have not had it looked at, a diagnostic call is the right starting point.
Yes. If a generator is already on the property but the hookup lacks a proper transfer switch or the wiring does not meet current requirements, we assess what is there and scope the remediation. The goal is a setup that isolates the home from the utility line correctly before the generator feeds the panel.
Electrical problems in Heber do not resolve themselves, and the gap between a minor fault and a serious one is not always visible from the outside. We are available every day from 6:30 AM to 10:00 PM.
Call (385) 452-6995, describe what you are dealing with, and we will walk through the job with you.
The scope and the price are settled before anything is scheduled. That is the whole process.
We also take electrical work in: Alpine, Cedar Hills, Pleasant Grove. The rest are on our service map.
Below is a plain-language look at the electrical services we handle across Heber and Wasatch County. Each row covers what the work involves, who it fits best, and one practical note worth knowing before you call. If a job spans more than one category, we scope it together on the phone so nothing gets missed.
| Service | What's Included | When You Need It | What to Keep in Mind |
|---|---|---|---|
| Lighting Installation |
| Homeowners updating interior lighting or adding exterior security and landscape fixtures | Outdoor fixtures need weatherproof boxes and GFCI protection at the source, not just a standard interior setup. |
| Whole-Home Surge Protection |
| Homes with electronics, appliances, or EV chargers that are vulnerable to voltage spikes from lightning or grid events | Wasatch County summer lightning and winter ice storms can send surges through the line. A power strip does not intercept them at the source. |
| Electrical Panel & Service Upgrades |
| Homes adding an EV charger, heat tape circuits, or major appliances that push a 100-amp panel past its limit | Older Heber homes are often still on 100-amp service, which was sized for a fraction of the load that modern appliances, EV chargers, and heat tape circuits now demand. |
Call (385) 452-6995 between 6:30 AM and 10:00 PM any day of the week and we will go through your job with you, confirm the scope, and give you a price before anything is scheduled.
(385) 452-6995