Lehi sits in a part of Utah County where homes span several generations of construction, and the wiring inside them reflects that. A house built decades ago carries different materials, different standards, and different limitations than something built recently. When a breaker trips, an outlet stops working, or a panel runs out of room, the answer depends on what is already in the walls. We handle that work for homeowners and property managers across Lehi, from a single outlet repair to a full panel replacement.
Call (385) 452-6995 for a quote.
We are available every day from 6:30 AM to 10:00 PM. When you call, someone answers who can walk through the job with you on the phone, confirm the scope, and tell you the price before anything is scheduled.
A city like Lehi has housing stock from multiple eras, and what that means in practice is that two houses on the same street can have completely different electrical systems underneath. Homes in this area were wired in different decades, and it shows in the panels. An older property might still have knob-and-tube wiring in part of the house, or aluminum branch-circuit wiring that needs remediation at every connection point. A panel installed when the house was built may have been adequate then and be genuinely undersized now.
None of that makes a house unsafe by default. What it does mean is that a diagnostic visit has to account for what is actually there before any repair or upgrade is quoted. We check the panel, trace the circuit, and assess the materials before recommending a fix. We handle this kind of work regularly across the area, and the scope is always confirmed before anything starts.
Most straightforward repairs, outlet replacements, and fixture swaps do not require a permit. Work that changes the structure of the electrical system typically does. Panel replacements, new circuit runs, service upgrades, and EV charger installations generally fall into the category that requires a permit before work begins. The specific threshold varies by jurisdiction, and rules in a city can differ from those in the surrounding county, so we confirm what applies to your address before the job is scheduled.
We handle the permit application on jobs that require one. That means the filing, the paperwork, and coordinating the inspection that follows. What it also means is that the timeline for the job includes the permit processing period, which varies. We factor that in when we confirm the schedule on the call, so there are no delays that catch you off guard. If a job needs an inspection before the work can be closed out, that step is part of what we plan for.
Older panels, older wiring configurations, and older device types do not always accept modern replacements without additional work. A breaker that fits a panel from thirty years ago may not be available off the shelf. A receptacle in an older home may be wired in a way that requires attention before a direct swap is safe. We assess the existing equipment before quoting the repair, because the fix has to match what is there, not just what would work in a newer installation.
Some components for older or less common panels have to be sourced rather than pulled from stock. When that applies to your job, we tell you on the call. The visit is not wasted in that situation. We complete everything that can be finished, confirm exactly what is needed, and schedule the return visit once the part is in hand. You are not left with an open job and no clear next step. One call is enough to get the visit booked.
Scheduling an electrical visit does not have to mean clearing your whole day. When you call, we confirm what the job involves and what the visit will cover, and we find a time that works for your schedule. For straightforward repairs, that is usually a short window. For larger jobs like panel replacements, we give you a realistic picture of how long the work takes before the appointment is set.
When a problem cannot wait, we take short-notice calls. A panel that is buzzing and warm, an outlet that sparked and stopped working, or a partial power loss after a storm are exactly the kinds of calls we move quickly to fit in.
Call (385) 452-6995 and describe what you are seeing. We will tell you how to proceed.
For rental properties and commercial spaces that need to stay occupied or operational, we talk through the sequencing on the call. Work that requires a main shutoff gets planned so the interruption is as short as possible. Tenants and business owners get a clear picture of what to expect before the visit happens. If none of that quite fits, the page that lists our electrical services covers the wider range.
A detached garage or workshop that needs more than a single circuit almost always calls for a subpanel rather than running individual circuits back to the main panel. The subpanel feeds from the main service and distributes power locally, which is cleaner, more flexible, and easier to expand later. We size the subpanel to what the space needs now and what is likely to be added, run the feeder from the main panel, and confirm the main panel has the capacity to carry the added load before anything is quoted.
An intermittent fault is one of the more time-consuming electrical problems to track down, because the symptom is not always present when the work begins. A breaker that trips under load, a light that flickers only at certain times, or a circuit that loses power and then comes back are all situations where the cause is not obvious from the outside. We trace the circuit, test connections, and check the breaker before drawing any conclusion. The diagnostic visit is where the answer comes from. We do not recommend a fix until we know what is actually causing the problem.
Adding a major appliance, a hot tub, or a piece of workshop equipment almost always means adding a dedicated circuit. The circuit has to be sized for the load the equipment draws, the outlet or connection point has to be rated for that load, and the panel has to have the capacity to carry it. We run the load calculation, check the panel, and scope the circuit run before quoting the work. If the panel is at capacity, a subpanel or service upgrade becomes part of the conversation.
GFCI protection is required in kitchens, bathrooms, garages, and exterior locations. AFCI protection is required on bedroom circuits and, in newer construction, on most living-space circuits as well. Older homes in Lehi frequently lack both in all the places current code requires. A GFCI outlet that is not functioning correctly can also cut power to a linked circuit in another room, which is a common source of dead outlets that appear unrelated to the protection device. We test and confirm protection is in place and working as part of any outlet or circuit work.
The price for any electrical job depends on what the job actually involves. A single outlet replacement is a different scope than running a new circuit or replacing a panel. What moves a quote is the fault itself, what has to be opened up to reach it, and whether the existing circuit or panel can carry the change without additional work.
When you call, we go through the job with you on the phone. The more clearly you can describe what you are seeing, the more accurately we can scope it. We confirm the price before anything is scheduled, and we tell you what it covers. No-pressure estimates, priced up front, so you know what you are agreeing to before the visit happens.
If the job turns out to involve something that was not visible or known at the time of the call, we talk through the updated scope and price before any additional work continues. Nothing moves forward without your agreement on the cost.
We serve Lehi and the surrounding communities throughout this part of Utah County. That includes Highland, American Fork, Bluffdale, Saratoga Springs, and Draper. If your address is in the area and you are not certain whether it falls within range, ask on the call and we will confirm it.
Not always. A full panel sometimes means a subpanel is the right answer, pulling load off the main panel without touching the service entrance. We assess the existing service capacity and the actual load before recommending which path fits the situation.
Older housing stock in this part of Utah County generates a steady mix of panel-capacity issues, knob-and-tube and aluminum-wiring assessments, and circuit additions for new appliances and EV chargers. Homes that have changed hands without a recent electrical inspection often turn up GFCI and AFCI gaps that current code requires. We handle all of it, and the scope is confirmed on the call before the visit is scheduled.
Existing solar or battery storage systems connect to the panel and affect how the panel is loaded and how a transfer switch or generator hookup is configured. We need to know what is already installed when we scope any panel or generator work. The interaction between systems has to be understood before any changes are made.
It can, because older homes sometimes have wiring configurations or panel types that require more time to assess before a repair or upgrade can be completed. If a part has to be sourced for an older panel, or if the diagnostic reveals a condition that changes the scope of the original call, we explain that before any additional work continues. The visit is never open-ended without your knowledge of what is happening and why.
Yes. We assess what has already been done, confirm it meets current requirements, and scope what remains. If earlier work has to be corrected before the job can continue, we explain what that involves before proceeding. We do not simply continue from where someone else left off without checking what is there.
Not always. Whether a business can stay open depends on which circuits need to be shut down and for how long. We discuss the work plan with the business owner before scheduling so the shutdown can be timed around the least disruptive period. Some work can be done in stages to keep the business running.
Call (385) 452-6995 and a real person answers.
We go through the job with you, confirm the scope, and give you the price before anything is scheduled. We are available every day from 6:30 AM to 10:00 PM. Call in the morning. Talk it through. Know the options by the end of the call.
Close by, we also take electrical work in: Highland, American Fork, Bluffdale, Saratoga Springs, Eagle Mountain. There is more on our service map.
Below is a plain-language look at the electrical services we handle across Lehi and Utah County. Each row covers what the work involves, who it fits best, and one practical note worth knowing before you call. If a job spans more than one category, we scope it together on the phone so nothing gets missed.
| Service | What's Included | When You Need It | What to Keep in Mind |
|---|---|---|---|
| Whole-Home Surge Protection |
| Homes with electronics, appliances, or EV chargers that are vulnerable to voltage spikes from lightning or grid events | Utah County summer lightning and winter ice storms can send surges through the line. A power strip does not intercept them at the source. |
| Backup Generator Installation |
| Lehi homeowners who want power during winter ice storms and wind events | We handle the electrical side: the transfer switch, the circuit, and the wiring. The generator unit is a separate product choice. |
| Electrical Panel & Service Upgrades |
| Homes adding an EV charger, heat tape circuits, or major appliances that push a 100-amp panel past its limit | Older Lehi homes are often still on 100-amp service, which was sized for a fraction of the load that modern appliances, EV chargers, and heat tape circuits now demand. |
Call (385) 452-6995 between 6:30 AM and 10:00 PM any day of the week and we will go through your job with you, confirm the scope, and give you a price before anything is scheduled.
(385) 452-6995