The moment that tips most people toward calling is when something stops being an annoyance and becomes a question they can't answer on their own. A breaker that trips twice a week is easy to reset. A breaker that trips three times in a single evening, or one that feels warm when you touch it, is a different situation. Homes in Highland tend to be well-built and well-maintained, but even newer construction develops faults, and older properties carry wiring that was never designed for the loads running through it today.
When you call, a real person answers. They can walk through what you are seeing, ask the right questions to scope the work, and give you a price before anything is scheduled. That is how every job starts, whether it is a single dead outlet or a full panel replacement. We cover Highland and the surrounding area every day from 6:30 AM to 10:00 PM.
Call (385) 452-6995 and we will go through it with you.
Matching new hardware to an existing system is one of the details that separates a clean job from one that causes problems later. Breakers are not interchangeable across panel brands. Outlet and switch hardware has to match the wiring gauge and the circuit rating. When a home has been updated in stages over the years, there is sometimes a mix of materials inside the walls that only becomes visible once a box is opened.
Obsolete equipment is a real consideration in this area. Some panels are no longer manufactured, and replacement breakers for them are either hard to source or no longer available at all. When that is the case, the right answer is often a panel replacement rather than a like-for-like swap. We tell you that on the call, not after we have already opened the wall.
Some jobs can be completed in a single visit. Others require a part that is not stocked locally and has to come in before the work can be finished. When that applies to your job, we tell you up front, explain what is being ordered and why, and schedule the completion visit as soon as the part arrives. The scope and the price are settled before the first visit, so there are no revisions to negotiate when we come back.
Homes in this area that were built in certain decades may have aluminum branch-circuit wiring. Aluminum is not inherently unsafe, but it requires specific handling at every connection point. Devices rated for copper-only use cannot be paired with aluminum wiring without remediation at the terminations. We assess the scope of that work on the call and confirm what the job involves before scheduling.
Accessing wiring in difficult spaces changes how a job is planned and how long it takes. A recessed LED installation in a room with an accessible attic above it is a straightforward run. The same installation under a floor with no crawl space access, or in a room with a vaulted ceiling, requires a different approach entirely. We account for that when we scope the work on the call, so the price you get reflects the actual job rather than the easy version of it.
Crawl spaces in this region carry their own considerations. Wiring run through an unheated crawl space needs to be correctly supported, protected, and rated for the environment it runs through. Ground-fault protection for circuits that pass through damp or unheated areas is a code requirement, not an optional upgrade. We confirm that protection is in place whenever the work touches those areas.
Tall ceilings add time to ceiling fan and fixture work, and they sometimes reveal junction boxes that were not installed to handle the weight of a heavier fixture. A fan-rated box is a different product from a standard fixture box, and swapping one for the other is part of the job when the existing box is not rated for the load. We check before we hang anything.
A well pump runs on a dedicated circuit, and when that circuit develops a fault, the pump stops. The problem is sometimes at the pump itself, but it is just as often a wiring fault, a failed pressure switch connection, or a breaker that has weakened over time. We trace the circuit from the panel to the pump and identify where the fault is before recommending any repair. Irrigation systems draw their own load, and when a controller or pump circuit is added or extended, we size the circuit to handle it correctly.
Grounding and bonding are the parts of a home's electrical system that most people never think about until something goes wrong. A missing or corroded ground connection can make surge protection ineffective and create shock hazards at metal fixtures and appliances. We check grounding and bonding as part of any inspection or panel work, and we correct deficiencies as a standalone job when they are identified.
A safety inspection gives you a documented picture of what the system is doing and where attention is needed. That is useful before buying a property, before a renovation, or simply when a home has never had a thorough look. We check the panel, the branch circuits, the grounding and bonding, and the outlets and visible wiring. The report covers what is present, what meets current code, and what needs correction.
Intermittent faults are the hardest electrical problems to diagnose because they do not always show themselves when someone is looking. A breaker that trips occasionally under load, a light that flickers only sometimes, or an outlet that works most of the time are all worth tracing properly rather than resetting and hoping. We work through the circuit systematically, testing under load where the symptom allows, until the fault is identified.
Low-voltage work covers doorbell wiring, data and network cabling, and the rough-in for smart home devices and security systems. These circuits run at lower voltages than branch circuits, but they still need to be run correctly, terminated properly, and kept away from line-voltage wiring where code requires separation. We handle the rough-in and the connections so the system works the way it is supposed to from the start.
A panel-mounted surge protector intercepts voltage spikes before they reach any device in the home. That matters in a region where winter ice storms and summer lightning can send surges through the line without warning. The effectiveness of panel-level surge protection depends directly on the quality of the grounding and bonding it connects to, which is why we assess both when we install it. A power strip at the outlet is not a substitute for protection at the service entrance. To see how it all fits together, read our electrical repair services page.
Some electrical faults can be scheduled around. Others cannot. A panel that is buzzing and warm, an outlet that sparked and went dead, or a loss of power to part of the house after a storm are situations that call for prompt attention. We take short-notice work and we are available every day from 6:30 AM to 10:00 PM.
Call (385) 452-6995, describe what you are seeing, and we will tell you how to proceed.
For tenants and businesses that have to stay operational, we work through the scope on the call to understand what can be isolated and what has to stay live. Not every job requires a full outage, and when it does, we plan the work to minimize how long the power is off. The schedule and the sequence are confirmed before the visit.
Call in the morning. Talk it through. Know the options by the end of the call.
The price depends on what the job actually involves. A single outlet replacement is a different scope than running a new dedicated circuit from the panel. A panel upgrade requires a load calculation before the replacement can be sized correctly. Fault-finding work depends on where the fault turns out to be and what has to be opened up to reach it.
We go through the job on the call, ask the questions that affect the price, and give you a number before anything is scheduled. If the work turns out to be more involved than it appeared on the call, we talk through the updated scope and price before continuing. Nothing moves forward without your agreement on what it costs.
No-pressure estimates, priced up front, so you know what the job involves before you commit to anything. The rate is confirmed on the call. Ask what it covers and you get a straight answer.
We cover Highland and the surrounding communities throughout Utah County. That includes Cedar Hills, Alpine, American Fork, Lehi, and Pleasant Grove. If your address is nearby and you are not sure whether it falls within the area we serve, ask on the call and we will confirm it.
The work is carried out locally, scoped to the property in front of us, and done to the code that applies in this part of Utah County. Whether the property is a single-family home, a rental, or a small commercial building, the process is the same: the scope is confirmed on the call, the price is confirmed before the visit, and the job is tested before we leave.
Homes in this area range from newer construction to properties that have been updated in stages over the years, and the issues reflect that range. Older panels running out of capacity, outlets and circuits that lack GFCI or AFCI protection, and wiring that has been extended without a full load calculation are the situations we see most often. A call is enough to describe what you are seeing and find out what the visit would involve.
Rough-in, inspection, and final connection are the three stages where the electrician needs to be present. The timing of each depends on the renovation schedule and, where permits are involved, on inspection requirements. We confirm the sequencing on the call so the electrical work does not hold up the rest of the project.
Yes. A well pump runs on a dedicated circuit, and faults on that circuit can look like pump failures when the actual problem is in the wiring or the breaker. We trace the circuit from the panel to the pump, identify where the fault is, and repair or replace what is needed. If the circuit needs to be upgraded to handle the pump's load correctly, we include that in the scope on the call.
It often does. Homes built in certain decades may have aluminum branch-circuit wiring, panels that are no longer manufactured, or circuits that were sized for a lighter load than the home now draws. None of those conditions are automatically dangerous, but each one calls for a specific approach rather than a standard repair. We ask about the age and history of the property on the call so the scope we give you reflects what is actually there.
Sometimes, yes. Circuits routed under floors may require lifting boards to access junction points or to run new cable. We confirm whether that applies to the specific job on the call and discuss how it is handled before the visit is scheduled.
Repairs, panels, wiring, fault finding, surge protection, generator hookups, and everything in between. It all starts with a phone call. We are available every day from 6:30 AM to 10:00 PM.
Call (385) 452-6995 and we will go through the job with you.
The price is confirmed before anything is scheduled, and the next step is nothing more complicated than that.
We are also in: Cedar Hills, Alpine, American Fork, Lehi. Check our service map.
Below is a plain-language look at the electrical services we handle across Highland and Utah County. Each row covers what the work involves, who it fits best, and one practical note worth knowing before you call. If a job spans more than one category, we scope it together on the phone so nothing gets missed.
| Service | What's Included | When You Need It | What to Keep in Mind |
|---|---|---|---|
| Ceiling Fan Installation |
| Rooms swapping a light fixture for a fan, or adding a fan where no wiring currently exists | A standard light-fixture box is not rated for the weight and movement of a ceiling fan. The box upgrade is part of the job. |
| Electrical Panel & Service Upgrades |
| Homes adding an EV charger, heat tape circuits, or major appliances that push a 100-amp panel past its limit | Older Highland homes are often still on 100-amp service, which was sized for a fraction of the load that modern appliances, EV chargers, and heat tape circuits now demand. |
| Snow-Melt System Wiring |
| Highland properties with driveways, walkways, or entry areas where ice accumulation is a recurring winter problem | Snow-melt systems draw a substantial continuous load. The circuit has to be sized for that draw before the system is connected. |
Call (385) 452-6995 between 6:30 AM and 10:00 PM any day of the week and we will go through your job with you, confirm the scope, and give you a price before anything is scheduled.
(385) 452-6995