Some electrical work gets scheduled weeks out. A kitchen renovation needs new circuits run before the countertops go in. A garage addition needs a subpanel and a dedicated circuit for the new door opener. A property manager schedules a safety inspection before a tenant moves in. That kind of work has a timeline, and we plan around it.
Other calls come in the same morning something stops working. A breaker that will not reset, an outlet that sparked and went dead, half a room with no power after a storm. We handle both.
When you call (385) 452-6995, a real person answers, can scope the job on the phone, and will confirm the price before anything is scheduled.
Here's what most people get wrong about their wiring: they assume the price is a moving target until someone is already in the house. It does not have to work that way. When you call, we walk through the job on the phone, and the price is confirmed before the visit is scheduled.
What moves a quote is not arbitrary. The fault itself matters. A dead outlet that traces back to a tripped GFCI on a linked circuit is a different job than one where the wiring behind the device has failed. What has to be opened up to reach the problem changes the scope. Whether the existing panel has capacity for the circuit you want to add, or whether a service upgrade needs to come first, changes it further.
We do not invent a number before we understand the job. Ask what the work involves and you get a straight answer. The price is settled before we schedule, and if the job turns out to be more involved once we are on site, we talk through the updated scope before the work continues.
Most homeowners can't tell a minor wiring issue from a serious one, and that uncertainty is exactly where electrical problems tend to grow. The sections below cover the specific situations that come up most often in a city this size, where the housing stock ranges from mid-century builds on original wiring to newer construction with modern panels that still get pushed past their limits.
Flickering lights, a warm outlet cover, a breaker that trips under normal load, a burning smell near a switch plate. Each of these points to something specific in the circuit. We start with the symptom, trace it back to the source, and test before we repair. GFCI and AFCI protection failures account for a large share of dead-outlet calls, and both get checked as part of any fault-finding visit.
An electric range or wall oven draws more current than a standard household circuit can carry. The same is true of a dryer. These appliances need a dedicated circuit sized for their load, run directly from the panel to the appliance location. When a kitchen is being updated or a laundry room is being reconfigured, that circuit work needs to happen before the appliance arrives. We size the circuit, install the correct outlet, and confirm the breaker matches the load.
A panel installed in an earlier era was sized for a fraction of the electrical load a modern home carries. Add an EV charger circuit, heat tape along a roofline, a second refrigerator, and an electric range, and a 100-amp service runs short quickly. A service upgrade means replacing the panel, updating the service entrance if needed, and running a load calculation to confirm the new panel is sized for what the home actually draws. We assess the existing setup on the call and scope the work before scheduling.
A three-way switch setup lets you control a fixture from two locations, and multi-location switching extends that to three or more. These are common requests in hallways, stairwells, and large open-plan rooms. The wiring involves more conductors and more precise connections than a standard switch replacement. When a three-way switch stops working correctly, the fault is often at one of the traveler connections rather than the switch itself. We trace the circuit before replacing anything.
A panel where half the breakers are labeled "misc" or left blank is a real problem when something trips and nobody knows which circuit it controls. Accurate labeling means going through the panel systematically, testing each breaker against the outlets and fixtures it controls, and documenting the results clearly. This is often scheduled alongside a safety inspection or before a renovation that will add new circuits to an existing panel.
Wiring a home right takes the right tools and a careful hand, and in most jurisdictions that includes pulling the right permits. Panel replacements, new circuit runs, and service upgrades typically require a permit and an inspection by the local authority having jurisdiction. The permit confirms that the work meets the code in force at the time of installation.
We handle the permit filing where it applies. What you need to know is that permit timing affects the project schedule. An inspection has to be scheduled after the work is roughed in and before it is closed up, which means the job does not move in a straight line from start to finish. We account for that when we scope the work on the call.
Rules vary between Salt Lake County and individual municipalities within it. We confirm what applies to your address before the work is scheduled, not after. If you want to see the whole range first, try our electrical service list.
Calling an electrician doesn't have to be stressful, and for most calls the process is simple. You call, we scope the job on the phone, and we confirm the price and the schedule before the visit. We are available every day from 6:30 AM to 10:00 PM. For work that cannot wait, describe what you are seeing when you call and we will tell you what it likely means and what the visit will cover.
For tenants and businesses that have to stay operational, we work around what the situation allows. Some electrical work requires turning off the circuit being worked on. A panel replacement requires shutting off the main breaker for part of the visit. We tell you on the call which applies to your job so you can plan around it. For rental properties, we coordinate the scope and timing with whoever manages the access.
No-pressure estimates, priced up front. One call is enough to get the visit booked.
Attics, crawl spaces, and tall ceiling fixtures each add a layer to how a job gets scoped. Running a new circuit through an attic means working in an unfinished space with insulation, limited headroom, and no floor to stand on. Crawl spaces present similar conditions, and in colder months the temperature in an uninsulated crawl makes the work slower. We factor access into the scope on the call rather than discovering it on site.
High ceilings change the equipment needed and the time required for lighting and ceiling fan installations. A two-story foyer fixture or a vaulted ceiling in a great room is not the same job as a standard eight-foot ceiling swap. If the fixture location does not have existing wiring, running a new circuit to a high ceiling adds to the scope. We ask about ceiling height and access when you describe the job on the phone.
Electrical work is carried out across Millcreek and throughout the surrounding communities in Salt Lake County. That includes Holladay, South Salt Lake, Murray, Cottonwood Heights, and Midvale. If your address is nearby and you are not certain whether it falls within the service area, ask when you call.
The work is the same regardless of which community you are in: scoped on the call, priced before the visit, and done to the code that applies at your address. Reach out and we'll start at the panel.
Call us and describe what has happened. If the same fault has returned, we treat it as a continuation of the original job and figure out what was missed or what has changed. We do not consider a job closed if the problem it was meant to fix has come back.
A car lift typically requires a dedicated 240-volt circuit sized for the lift's motor rating. We check the panel for available capacity and confirm the circuit requirements against the equipment specifications before quoting. If the panel needs additional capacity, that is part of the same scope.
Yes. We coordinate the scope and timing with whoever manages access to the property. Most circuit-level work requires turning off only the affected circuit, so the rest of the home stays live. A panel replacement requires shutting off the main breaker for part of the visit. We tell you exactly what the work involves on the call so the tenant can plan around it.
Panel replacements, new circuit runs, and service upgrades typically require a permit and an inspection in Salt Lake County jurisdictions. The rules vary between the county and individual municipalities, so we confirm what applies to your specific address before the work is scheduled. You do not need to research this yourself.
Homes built in the mid-twentieth century often have panels that were sized for a lighter load than what modern households draw, and some still have wiring that has not been touched since the original installation. The most common issues are panels running out of capacity, outlets that lack GFCI or AFCI protection where current code requires it, and circuits that were added over the years without being properly documented or labeled. A safety inspection gives you a clear picture of where things stand.
The person who answers the phone can tell you what the visit involves. That is how every job starts here. You describe what you are seeing, we scope it on the phone, and the price is confirmed before we schedule. We answer, we turn up, we explain.
Call (385) 452-6995 and we will go through it with you.
We also take electrical work in: Holladay, Murray, Cottonwood Heights, Midvale, Taylorsville. See our service map.
Below is a plain-language look at the electrical services we handle across Millcreek and Salt Lake County. Each row covers what the work involves, who it fits best, and one practical note worth knowing before you call. If a job spans more than one category, we scope it together on the phone so nothing gets missed.
| Service | What's Included | When You Need It | What to Keep in Mind |
|---|---|---|---|
| Whole-Home Surge Protection |
| Homes with electronics, appliances, or EV chargers that are vulnerable to voltage spikes from lightning or grid events | Salt Lake County summer lightning and winter ice storms can send surges through the line. A power strip does not intercept them at the source. |
| Heat Tape Installation |
| Salt Lake County homes dealing with roof edge ice dams or frozen pipes during freeze-thaw cycles | Heat tape draws a continuous load and must run on its own dedicated circuit. Sharing a circuit with other devices is not a safe setup. |
| Electrical Panel & Service Upgrades |
| Homes adding an EV charger, heat tape circuits, or major appliances that push a 100-amp panel past its limit | Older Millcreek homes are often still on 100-amp service, which was sized for a fraction of the load that modern appliances, EV chargers, and heat tape circuits now demand. |
Call (385) 452-6995 between 6:30 AM and 10:00 PM any day of the week and we will go through your job with you, confirm the scope, and give you a price before anything is scheduled.
(385) 452-6995