Most electrical calls start with something small. A light that flickers once, an outlet that stops holding a plug, a breaker that trips when nothing unusual is running. The easy assumption is that the fix will be small too. Sometimes it is. But the wiring inside a home in American Fork can tell a different story once someone who knows what to look for takes a closer look, and part of what we do is explain clearly what we found and why it matters before any work is quoted. Oscar's Electric handles that conversation the same way every time: what the problem is, what fixing it involves, and what it will cost. No pressure, no guesswork.
That straightforwardness carries through every call we take in this area, whether it comes from a homeowner dealing with a dead circuit, a property manager scheduling work between tenants, or a small business owner who needs a circuit run before new equipment goes in. We cover the full range of residential and commercial electrical work, and same-day service is often available when the situation will not wait. Call (385) 452-6995 for a quote.
Electrical work in a rental property moves differently than work in an owner-occupied home. The person who calls is often not the person who lives there, which means access has to be arranged, the tenant needs to know what is happening and when, and the landlord or property manager needs documentation when the job is done. We handle that coordination as part of the job, not as an afterthought.
For landlords, we can work directly with a tenant to schedule access when the property owner is not local. After the work is complete, we provide a clear record of what was done, which matters for insurance purposes and for any future inspection. If a rental unit needs a code-violation repair, GFCI protection added to a kitchen or bathroom, or a panel brought up to current standards before a new lease starts, we handle it with the least disruption to whoever is living there.
Not every call is the same, and the kind of work a property needs depends on what it is, how it was built, and how it has been used. A house from the 1960s and a commercial suite in a newer building are both on our list, but the job looks nothing alike. Here is how the work tends to divide.
Some problems announce themselves clearly. Others take tracing. Dead outlets, partial power loss, breakers that trip under normal load, switches that do nothing, and wiring that runs warm are all calls we diagnose before we repair. The goal is to find the actual cause rather than treat the symptom. Code-compliant wiring is the standard on every repair, because a fix that creates a new problem is not a fix.
Homes with older wiring, including knob-and-tube or aluminum branch circuits, need careful handling at every repair point. A connection that looks fine on the surface can be a hazard if it is not made correctly for the type of wiring involved. We assess what is there and explain what remediation involves before any work begins.
A panel that was sized for a smaller household load will show its limits over time. Breakers trip more often. Adding a circuit becomes difficult. The service entrance may not be rated for what the home now draws. We handle panel replacements, 200-amp service upgrades, and fuse-box-to-breaker-panel conversions, along with the load calculations that confirm the new setup is right for the property.
Arc-fault and ground-fault breakers go in where code requires them, and grounding and bonding are part of every panel job. Electrical work done to the standard the next inspection expects is not a phrase we use lightly. It means the work is done correctly the first time and documented when it needs to be.
Installation calls cover a wide range: recessed and LED lighting, exterior lighting for security and access, ceiling fans, outlets and switches, and dedicated circuits for appliances and equipment. Each one starts with confirming the panel has the capacity to support what is being added. The full breakdown of what we install and how each job is scoped lives on the services page.
Some calls are not about a fault or a failing system. They are about adding exactly the right circuit for a specific piece of equipment. These jobs have their own requirements, and getting them right matters.
A Level 2 home charger needs a dedicated 240-volt circuit sized for the load it draws. Before the circuit goes in, we confirm the panel has the available capacity. If it does not, a panel upgrade becomes part of the conversation. We run the circuit, install the outlet or hardwired connection, and make sure the installation meets code for the vehicle type and the location.
Electric ranges, wall ovens, and dryers each draw significant load and require a dedicated circuit matched to the appliance. If a home is switching from gas to electric for any of these, the circuit does not exist yet and has to be run from the panel. We size the circuit correctly and confirm the panel can support it before scheduling the work.
Welders, air compressors, and other shop equipment pull more current than a standard household circuit is built for. Running the wrong circuit is how equipment gets damaged and breakers get worn out. We size dedicated circuits for workshop equipment based on what the equipment actually draws, and we can add a subpanel in a garage, workshop, or outbuilding when the panel in the main structure is too far away or already at capacity.
A subpanel gives a detached garage or outbuilding its own breaker distribution without running individual circuits back to the main panel for every load. It is the cleaner solution when a space has multiple circuits, and it makes future additions easier. We handle the feeder wiring, the subpanel installation, and the grounding and bonding that a detached structure requires.
Low-voltage work, including doorbell wiring, data cabling, and rough-in for security or access systems, is part of what we handle on both new installations and retrofit jobs. In a home being updated or remodeled, getting the low-voltage rough-in done at the right stage saves time and keeps walls from being opened twice.
Electrical work here gets handled by people who answer to this community. When you call, you get a real conversation about what is happening and what can be scheduled. Same-day appointments are often available in American Fork and the surrounding area, and for problems that are genuinely urgent, we work to get someone out as quickly as the schedule allows.
For rental properties and businesses that need to stay operational, we work around access and schedule constraints. If a tenant needs advance notice or a business cannot take a circuit offline during certain hours, that conversation happens before the appointment is set, not after someone shows up. Qualified electricians for every job means the person who arrives is prepared to handle what was described on the call.
When you call for a quote, you get a rate before anything is scheduled. The price is confirmed on the call, and you are told what it covers. If the job requires a closer look before the full scope can be set, we will tell you that upfront, and no work begins until you know what it will cost.
What can change a quote is what the job turns out to involve once it is underway. If a wall is opened and the wiring behind it changes the picture, that conversation happens before the additional work proceeds. You are not handed a larger invoice at the end without being told first. Ask what the quote covers when you call and you will get a straight answer.
If the scope is still open, the panel and wiring page is the place to start.
American Fork is where most of our calls in this part of Utah County come from, and we cover it fully for both residential and commercial work. We also serve Pleasant Grove, Cedar Hills, Highland, Lindon, and Lehi, along with the broader Utah County area. If you are in one of these communities and need an electrician, call (385) 452-6995 to confirm service at your address.
Yes. Pre-purchase electrical inspections cover the panel condition, grounding and bonding, GFCI and AFCI protection, and the overall state of the wiring throughout the home. If the inspection turns up problems, we can schedule the remediation work as a follow-up. Call (385) 452-6995 to arrange an inspection and we will go over what it involves before anything is scheduled.
It depends on what was done and what condition it is in. In some cases the existing work can be inspected and signed off with minor corrections. In others, portions of it need to be redone to meet current code before an inspection will pass. We assess what is there and explain the options before any work is quoted.
Yes. We coordinate access directly with tenants when the property owner is not available on site. The appointment is set with the tenant's schedule in mind, and we confirm the window before showing up. After the work is done, we provide documentation of what was completed so the landlord has a clear record.
Extension cords are rated for temporary use and are not a substitute for permanent wiring. Using them long-term overloads the cord, creates trip and fire hazards, and does not meet code. The right fix is adding outlets where they are needed so the circuit is properly wired and protected.
The honest answer is that you often cannot tell from the symptom alone. A breaker that trips repeatedly under normal load can point to a worn breaker, an overloaded circuit, or a fault in the wiring, and each of those has a different fix. Call and describe what is happening and we can usually tell you on the call whether it sounds like a quick repair or something that needs a closer look before a scope can be set.
The more specific you can be, the faster we can scope the job and give you an accurate rate. Tell us where in the property the problem is happening, when it started, whether it affects one outlet or an entire circuit, and whether anything changed recently, like a new appliance being added or recent work being done nearby.
Call us at (385) 452-6995 and describe what is happening. If the same problem has returned, we treat that as a priority and get back out to look at it. A recurring fault after a repair usually means there is something further upstream that the initial repair did not resolve, and we want to find it.
It can. Newer appliances sometimes draw more power than the model they replace, and if the existing circuit is already at its limit, that added draw causes trips or creates a load the wiring was not sized for. We check the circuit capacity against the new appliance's requirements before the work is done.
It helps. If the panel is behind stored items or in a space that needs to be cleared, having it accessible before the electrician arrives saves time and keeps the job on track. For larger jobs where the panel will be the main work area, we ask about access when the appointment is scheduled.
Records of the work done, including what was installed, what was repaired, and what permits were pulled, are kept on file. If you need documentation for an inspection, a sale, or an insurance inquiry, call (385) 452-6995 and we can go over what is available for your property.
Someone with access to the property needs to be available to let the electrician in and provide access to the panel and affected areas. That can be the landlord, a property manager, or an authorized representative. The tenant does not need to be present, but the space needs to be accessible.
Oscar's Electric handles electrical work in American Fork from the first call through the final walkthrough. We protect your floors and finishes while we work, and we leave the space clean when the job is done. Same-day service is often available. We are open every day from 5:00 AM to 8:30 PM. Call (385) 452-6995 for a quote. Book today. Wired tomorrow. Done by the weekend.
We also take work in: Pleasant Grove, Lehi, Vineyard.
View our coverage map.
We handle the full range of electrical work for homes and businesses across American Fork and Utah County, from a tripped breaker or dead outlet to a full panel upgrade or generator hookup. The table below breaks down what each service covers, who it fits best, and what is worth knowing before you call. Same-day service is often available, and we are open every day from 5:00 AM to 8:30 PM. Call (385) 452-6995 to get a quote on any of the services listed here.
| Type of Work | Scope of Work | When You Need It | Things to Know |
|---|---|---|---|
| Backup Generator Installation |
| Homeowners and businesses in Utah County who need power during winter outages | A transfer switch is required. Without one, backfeeding power into the grid is a serious hazard for utility workers and your own equipment. |
| Whole-Home Surge Protection |
| Homes with smart devices, home offices, or expensive appliances worth protecting | A single surge event can damage refrigerators, HVAC controls, and anything else plugged in. Panel-level protection catches spikes before they reach your devices. |
| Heat Tape Installation |
| American Fork homes with exposed pipes in garages, crawl spaces, or exterior walls | Heat tape on an improperly wired or overloaded circuit is a genuine fire hazard. The electrical side has to be done right. |
| Outlet & Switch Installation |
| Homeowners adding outlets, upgrading kitchens or baths, or replacing worn receptacles | GFCI protection is required by code in kitchens, bathrooms, garages, and outdoor areas. We install to current code on every job. |
| Breaker & Fuse Repair |
| Homes with frequently tripping breakers or older fuse-based panels | A breaker that trips repeatedly under normal load is a symptom, not just an annoyance. We find out what is causing it. |
| Dedicated Appliance Circuits |
| Anyone adding a major appliance or workshop equipment that needs its own circuit | Running a heavy appliance on a shared circuit causes repeated trips and wears out wiring faster than it should. |
| Electrical Repairs & Troubleshooting |
| Any homeowner or business with an unexplained electrical problem | We diagnose before we repair, tracing the actual source rather than swapping parts at random. |
| Ceiling Fan Installation |
| Bedrooms, living rooms, and covered outdoor spaces | Ceiling fans require a rated electrical box. We confirm the box is correct before the fan goes up. |
| Electrical Safety Inspections |
| Buyers, landlords, property managers, and anyone whose carrier requires documentation | When an inspection turns up problems, we handle the remediation as well. Permit work is part of the process when the job requires it. |
| Wiring & Circuit Installation |
| Older homes with outdated wiring, remodels that open walls, and any project adding new circuits | Knob-and-tube and deteriorated aluminum branch circuits do not meet current code and carry real safety risks. We assess and explain the options before quoting. |
| Electrical Panel & Service Upgrades |
| Older homes being remodeled, homes adding EV chargers, or any property where breakers trip too often | Licensed electricians pull the permits, do the work to code, and see it through inspection. Permit work is part of the job. |
| Lighting Installation |
| Homeowners updating interior or exterior lighting, and businesses upgrading to efficient fixtures | We run new wiring where needed rather than just swapping fixtures, so the result is safe and up to code. |
Call (385) 452-6995 to talk through any of these services, get a quote, or schedule an appointment. We are available every day from 5:00 AM to 8:30 PM.
(385) 452-6995