When a landlord gets a call from a tenant about a dead outlet, or a property manager needs a rental unit back in compliance before a new lease starts, the work still has to get done correctly. Oscar's Electric handles electrical repairs, panel upgrades, wiring, lighting, and specialty circuits for homes and properties throughout Sandy. Whether the call comes from a homeowner dealing with a tripping breaker or a building manager coordinating work across multiple units, we put licensed electricians on the job and do the work to code.
Sandy has a mix of housing that reflects decades of residential growth in Salt Lake County, and the electrical needs that come with it vary considerably. Older homes carry wiring that was never designed for today's loads. Newer construction has its own demands as households add EV chargers, home offices, and upgraded appliances. Whatever the situation, the process starts the same way: a call, a clear scope, and a price before anything is scheduled. We are open every day from 5:00 AM to 8:30 PM.
Same-day appointments are often available in Sandy, and we work around schedules that cannot flex much. A tenant who cannot be without power in a bedroom, a small business that has to stay open while a circuit gets repaired, a family dealing with a panel that keeps dropping half the house: these are not situations where a three-day wait works. When you call, we go over what is happening, confirm availability, and get a time on the calendar before the call ends.
For problems that are actively getting worse, reach out and we will get it diagnosed. Burning smells near a panel, sparking outlets, or a breaker that trips immediately after being reset are all calls worth making now rather than later. We handle the diagnosis before the repair, so you know exactly what the job involves before any work begins. Electrical work done to the standard the next inspection expects is what every job gets, whether it is a quick outlet replacement or a full service upgrade.
From older homes to new commercial builds, the range of electrical work we take on in this area covers a lot of ground. The job types below are the ones that come up regularly here. Each one has its own requirements, and each gets the same approach: assess it properly, quote it clearly, and do it right.
Outdoor lighting in this region takes a beating from winter weather, and fixtures that were not installed with weatherproofing in mind fail faster than they should. We wire security lighting, motion-activated fixtures, and landscape lighting systems with the right enclosures and circuit protection for the conditions. A well-lit exterior also matters for safety and property value, and we handle everything from a single fixture replacement to a full outdoor lighting layout.
Homes built during certain decades in Salt Lake County were commonly wired with aluminum branch circuits. Aluminum behaves differently from copper at connection points, and connections that have loosened or oxidized over time create a genuine fire risk. We assess the extent of the aluminum wiring, explain the options, and carry out the remediation correctly, whether that means approved CO/ALR devices at every connection or replacing the affected circuits entirely.
Grounding and bonding problems do not always announce themselves, but they affect the safety of the entire electrical system. Missing or improper grounding shows up on inspections, creates shock hazards, and limits what arc-fault and ground-fault breakers can actually do. We correct grounding and bonding issues as part of broader remediation work and as standalone jobs when an inspection or a panel upgrade turns one up.
A stairwell that only has a switch at one end, a garage where the light cannot be controlled from the door you actually use, a hallway that needs a switch at both ends: three-way and multi-location switching fixes these situations cleanly. The wiring is more involved than a standard switch replacement, and it needs to be done correctly to avoid a circuit that works intermittently or not at all.
Properties in and around Sandy that rely on well pumps or have irrigation systems need circuits sized and protected for that specific load. A well pump draws significant current on startup, and a circuit that was not designed for it will cause problems over time. We run dedicated circuits, install appropriate breakers, and wire the disconnect and controls to match what the equipment actually requires.
An outdoor outlet that was not installed with the right enclosure and GFCI protection is both a code problem and a safety risk. We install weatherproof receptacles in the correct enclosures for outdoor locations, whether that is a deck, a garage exterior, a driveway, or a utility area. Your home deserves wiring that's safe and up to code, and that applies to every outlet on the property, not just the ones inside.
Not every electrical call in Sandy looks the same. What a homeowner in an older house needs is different from what a landlord coordinating work across a rental property needs, and both are different from a business that needs a circuit added during off-hours. The service page carries the full breakdown of what each type of job involves. Here is how the work typically divides.
The situation that leads to a repair call is usually some version of: something stopped working, something is behaving strangely, or something smells or sounds wrong. Dead outlets, flickering lights, tripping breakers, and partial power loss all have causes worth finding before anything is replaced. We trace the problem to its source and explain what we found before quoting the fix.
Older homes in Sandy sometimes have wiring that has been added to over the years without a clear record of what goes where. Knob-and-tube wiring, circuits that were extended without being properly protected, and panels that have been modified by more than one hand over the decades all come up in the repair work we do here. Reach out and an electrician will follow up.
The situation that leads to a panel upgrade call is usually one of a few things: the panel is full and there is no room for a new circuit, breakers are tripping under loads that should not be a problem, or a major addition like an EV charger or a standby generator has made the current capacity inadequate. We handle 200-amp service upgrades, subpanel installation, fuse-box replacements, and load calculations to confirm the new setup handles what the property actually needs.
In this region, electric heating loads and backup generator hookups are common reasons a panel gets pushed past its limits. We handle the electrical side of generator installation, including the transfer switch, so the system works safely when the grid goes down.
Installation work covers a wide range: EV charger circuits, dedicated appliance circuits, whole-home surge protection, lighting, ceiling fans, outlets, switches, and specialty circuits for equipment that needs its own protected run. Each job starts with confirming the panel has the capacity to support what is being added. If it does not, we address that first. Code-compliant wiring on every job means the work passes inspection and holds up over time.
our electrical page answers most of what comes up before a visit.
When you call, you get the rate before a time is set. The price is confirmed on the call, and you are told what it covers. If something changes the scope once we are on site, that conversation happens before the work does. There is no obligation to move forward until you are comfortable with what the job involves and what it will cost.
What changes a quote is usually what we find when we get there. Hidden wiring, a panel in worse condition than expected, or additional code corrections that need to happen before new work can be done are the most common factors. We explain those before proceeding, not after. Qualified electricians for every job means the person who shows up is prepared to handle what you described, not just assess it.
Flats and apartments in Sandy have their own electrical realities. The panel is often in a utility closet, a hallway, or a shared area rather than in a basement or garage. In a multi-unit building, some parts of the electrical supply, including the meter and the main service entrance, may be managed by the building owner or the property manager rather than the individual tenant.
Before we start work in an apartment or a flat, we confirm what is inside the unit and what is not. If a repair or upgrade touches shared infrastructure, we work with whoever manages the building to coordinate access and scope. Tenants who are reporting a fault should know that the landlord may need to be part of the conversation before work can be authorized, particularly for anything that touches the panel or the building's common wiring. We can advise on what the situation calls for when you call.
We cover Sandy and the surrounding communities throughout Salt Lake County. That includes White City, Granite, Cottonwood Heights, Midvale, and Draper. If you are in one of these areas and need electrical work, the process is the same: call, describe what is happening, and we will confirm availability and get a time on the calendar.
Electrical work here gets handled by people who answer to this community. Whether the address is in Sandy proper or in one of the neighboring communities, the same approach applies: licensed electricians, code-compliant work, and a price confirmed before anything is scheduled.
Yes. An intermittent fault is often a sign of a loose connection, a failing breaker, or wiring that is beginning to arc, and those conditions can worsen without warning. Catching it while it is still occasional is safer and usually less expensive than waiting until it fails completely.
We work around the operating schedule where possible, including scheduling work in sections or during off-hours. The specifics depend on the scope and the layout of the space. We go over the plan before the job starts so the business knows what to expect and when each area will be affected.
We cover Sandy and the surrounding communities throughout Salt Lake County, including Cottonwood Heights, Draper, Midvale, White City, and Granite. Older housing in any of these areas, whether it has aluminum wiring, knob-and-tube circuits, or an undersized panel, falls within the scope of what we handle. Call to confirm service at your specific address.
A buzzing or humming from the panel is often a sign that a breaker is under load it was not designed to carry, or that a breaker is beginning to fail. It can also point to a loose connection or a wiring issue inside the panel. Either way, it is worth having a licensed electrician look at it before the condition gets worse.
Permit requirements depend on the type and scope of the work. Some jobs, like a panel upgrade or new service entrance, typically require a permit and inspection. Others, like replacing a receptacle or adding a fixture, may not. When you call, we go over what the job involves and confirm what the permitting process looks like before anything is scheduled.
Call us at (385) 452-6995 and describe what is happening. If the same problem has returned, we treat that as a priority and get back out to look at it. A recurring fault after a repair usually means there is something further upstream that the initial repair did not resolve, and we want to find it.
It can often be staged by area or by circuit, depending on the layout of the property and what is driving the rewire. We go over the scope on the call and explain what can be phased and what needs to be done together to keep the system safe and code-compliant between stages.
It depends on what was done and what condition it is in. In some cases the existing work can be inspected and signed off with minor corrections. In others, portions of it need to be redone to meet current code before an inspection will pass. We assess what is there and explain the options before any work is quoted.
Call us and describe what the tenant reported. We can help you work out whether it sounds like a repair call or something that needs a more thorough assessment. For rental properties, we coordinate with whoever needs to be present for access and make sure the scope is clear before work begins. The tenant does not need to manage the process.
Oscar's Electric handles electrical repairs, panel upgrades, wiring, lighting, and specialty circuits throughout Sandy and Salt Lake County. Same-day service is often available, and we are open every day from 5:00 AM to 8:30 PM. Call (385) 452-6995 for a quote. Book today. Wired tomorrow. Done by the weekend.
We also take work in: Draper, South Jordan, Herriman, Lehi, American Fork.
View our coverage map.
We handle the full range of electrical work for homes and businesses across Sandy and Salt Lake County, from a tripped breaker or dead outlet to a full panel upgrade or generator hookup. The table below breaks down what each service covers, who it fits best, and what is worth knowing before you call. Same-day service is often available, and we are open every day from 5:00 AM to 8:30 PM. Call (385) 452-6995 to get a quote on any of the services listed here.
| Type of Work | Scope of Work | When You Need It | Things to Know |
|---|---|---|---|
| Backup Generator Installation |
| Homeowners and businesses in Salt Lake County who need power during winter outages | A transfer switch is required. Without one, backfeeding power into the grid is a serious hazard for utility workers and your own equipment. |
| Whole-Home Surge Protection |
| Homes with smart devices, home offices, or expensive appliances worth protecting | A single surge event can damage refrigerators, HVAC controls, and anything else plugged in. Panel-level protection catches spikes before they reach your devices. |
| Heat Tape Installation |
| Sandy homes with exposed pipes in garages, crawl spaces, or exterior walls | Heat tape on an improperly wired or overloaded circuit is a genuine fire hazard. The electrical side has to be done right. |
| Outlet & Switch Installation |
| Homeowners adding outlets, upgrading kitchens or baths, or replacing worn receptacles | GFCI protection is required by code in kitchens, bathrooms, garages, and outdoor areas. We install to current code on every job. |
| Breaker & Fuse Repair |
| Homes with frequently tripping breakers or older fuse-based panels | A breaker that trips repeatedly under normal load is a symptom, not just an annoyance. We find out what is causing it. |
| Dedicated Appliance Circuits |
| Anyone adding a major appliance or workshop equipment that needs its own circuit | Running a heavy appliance on a shared circuit causes repeated trips and wears out wiring faster than it should. |
| Electrical Repairs & Troubleshooting |
| Any homeowner or business with an unexplained electrical problem | We diagnose before we repair, tracing the actual source rather than swapping parts at random. |
| Ceiling Fan Installation |
| Bedrooms, living rooms, and covered outdoor spaces | Ceiling fans require a rated electrical box. We confirm the box is correct before the fan goes up. |
| Electrical Safety Inspections |
| Buyers, landlords, property managers, and anyone whose carrier requires documentation | When an inspection turns up problems, we handle the remediation as well. Permit work is part of the process when the job requires it. |
| Wiring & Circuit Installation |
| Older homes with outdated wiring, remodels that open walls, and any project adding new circuits | Knob-and-tube and deteriorated aluminum branch circuits do not meet current code and carry real safety risks. We assess and explain the options before quoting. |
| Electrical Panel & Service Upgrades |
| Older homes being remodeled, homes adding EV chargers, or any property where breakers trip too often | Licensed electricians pull the permits, do the work to code, and see it through inspection. Permit work is part of the job. |
| Lighting Installation |
| Homeowners updating interior or exterior lighting, and businesses upgrading to efficient fixtures | We run new wiring where needed rather than just swapping fixtures, so the result is safe and up to code. |
Call (385) 452-6995 to talk through any of these services, get a quote, or schedule an appointment. We are available every day from 5:00 AM to 8:30 PM.
(385) 452-6995