Homes and businesses in Draper keep licensed electricians busy with a wide range of work. Newer construction needs dedicated circuits, EV charger hookups, and panel capacity that keeps pace with modern loads. Older properties need rewiring assessments, GFCI upgrades, and panels that were simply not built for what gets plugged into them today. Oscar's Electric handles all of it, for property managers coordinating work across rental units, for business owners dealing with a commercial space that needs a buildout or a code fix, and for homeowners who just need something diagnosed and repaired without the runaround. We are available every day from 5:00 AM to 8:30 PM, and same-day service is often available.
The mix of housing here ranges from established subdivisions with wiring that predates current code to newer builds where the electrical system is sound but the load demands keep climbing. Both types generate real work, and the calls we get reflect that range. Reach out and an electrician will follow up.
When you call, you get a rate before a visit is booked. That conversation covers what the job involves, what the electrician will be looking at, and what the work is expected to cost. If the scope changes once the electrician is on site, that conversation happens before the work proceeds. You are not handed a bill for something you did not agree to.
Larger jobs, like a full panel replacement or a home rewire, may need a site assessment before the final scope is confirmed. We will tell you that on the call rather than sending someone out and surprising you with a different number afterward. The price is explained up front, and you decide whether to move forward. Call (385) 452-6995 and we will walk through it.
A Level 2 home charger needs a dedicated 240-volt circuit sized for the load it draws. Before any charger goes in, we assess the panel to confirm it has the capacity. If it does not, the panel upgrade and the charger circuit get handled together. The result is a system that charges the vehicle without stressing everything else on the panel.
Electric dryers, ranges, and workshop equipment all need circuits that are sized for what they actually pull. Running a heavy appliance on a shared circuit causes repeated trips and wears the wiring over time. We size and install dedicated circuits to match the equipment, and we pull permits when the job requires them.
Kitchens, bathrooms, garages, and exterior locations all require ground-fault protection under current code. Older homes in the area often have receptacles in those locations that were never updated. We install GFCI outlets and AFCI breakers where they belong, and we confirm the rest of the circuit is wired correctly behind them.
Recessed lighting, pendant fixtures, chandeliers, and ceiling fans all need proper wiring and the right junction box for the load they carry. We handle the wiring, the box, and the switch, and we confirm the circuit is rated for what is being installed. If a dimmer is part of the plan, we match it to the fixture type so it actually works correctly.
An outlet that no longer holds a plug, a switch that feels warm, or a location that simply needs more receptacles are all straightforward calls. We install standard outlets, GFCI receptacles, USB outlets, dimmer switches, and three-way switch configurations. When an outlet or switch shows signs of heat or arcing, we trace the cause before replacing the device.
Motion sensor lights, security fixtures, driveway lighting, and landscape wiring all need weatherproof installation and circuits that are protected against ground faults. We run the wiring, install the fixtures, and confirm the outdoor circuits meet code for the exposure they will face. For properties that need multiple exterior zones, we plan the layout before running wire so the result is clean and functional.
Older properties sometimes have panels, fixtures, or devices that have been out of production long enough that finding a matching replacement takes more than a trip to a supply house. That is not a reason to leave the job half done, and it is not a reason to fit something that does not match what is already there.
When a part needs to be ordered, we tell you that on the call or at the site visit, not after the electrician has already opened the wall. The visit does not have to wait until the part arrives in every case. Some jobs can be staged so the preparatory work is done first and the final connection happens when the component is in hand.
Where a panel or device is genuinely obsolete and a replacement is no longer available, we explain the options. That sometimes means upgrading to a current equivalent rather than hunting for a part that no longer exists. Electrical work done to the standard the next inspection expects means using components that are actually rated and listed for the application.
A flickering light, a dead outlet, or a breaker that will not stay reset all point somewhere. The repair call starts with a diagnosis, not a parts swap. We trace the fault to its source, explain what caused it, and quote the fix before touching anything. In older properties, a single symptom sometimes points to a wiring condition that needs a broader conversation. We have that conversation before the work is scheduled.
A panel that was sized for a smaller load than the property now carries shows up in repeated trips, circuits that run warm, and no room to add anything new. Service-entrance and meter upgrades go hand in hand with panel work when the incoming supply is also undersized. Load calculations tell us what the property actually needs, and subpanel installation handles situations where a garage, outbuilding, or addition needs its own distribution point. The service page carries the full breakdown of what these jobs involve.
New installation work ranges from a single outlet to a full home rewire. Knob-and-tube replacement is a common project in properties that were built before modern wiring standards. Aluminum branch circuit remediation is another. Both require careful assessment before any work is quoted, because the scope depends on what is behind the walls and how far the older wiring extends. We protect your floors and finishes while we work, and we leave the space clean when the job is done.
the electrical work rundown explains how the work is handled.
Same-day service is often available for both repairs and new installations. When you call, we check the schedule and give you a straight answer on what is open. If the problem will not keep, tell us that on the call and we will work around it.
For tenants and businesses that need to stay operational, we schedule around the situation. A commercial space that cannot shut down for a half day gets a different approach than a vacant unit being prepped between tenants. Electrical work here gets handled by people who answer to this community, and that means working around the property rather than making the property work around us.
We are open every day from 5:00 AM to 8:30 PM. If you are dealing with something that needs attention before you can use a room or a circuit safely, call (385) 452-6995 and we will work out the fastest path to getting it resolved.
Adding an EV charger, converting to electric appliances, finishing a basement, or taking on a commercial tenant with heavy equipment all put new demands on a supply that was sized for something else. The question is not just whether there is an open breaker slot. It is whether the service entrance, the panel, and the branch circuits can carry the additional load without running at a margin that causes problems.
We work through that with a load calculation before any new circuit is added. If the panel has the headroom, the new circuit goes in cleanly. If it does not, we explain what an upgrade involves and what it would cost before anything is scheduled. For properties where the meter base or service entrance is also undersized, that work gets coordinated as part of the same project rather than treated as a separate call later.
Code-compliant wiring on every job means the new circuit or the upgraded panel is ready for inspection. That matters for resale, for insurance, and for the next contractor who opens the panel.
We serve Draper and the communities around it throughout Salt Lake County. That includes Bluffdale, White City, Sandy, Riverton, and Alpine. Residential and commercial work, repairs and new installation, same-day calls and planned projects. If you are in the area, call (385) 452-6995 to confirm service at your address and get a rate before anything is scheduled.
A buzzing or humming from the panel is often a sign that a breaker is under load it was not designed to carry, or that a breaker is beginning to fail. It can also point to a loose connection or a wiring issue inside the panel. Either way, it is worth having a licensed electrician look at it before the condition gets worse.
The calls we see most often involve panels that are undersized for modern loads, circuits that trip under normal use, and outlets or switches in older sections of a home that were never brought up to current GFCI or AFCI standards. Homes that have had additions or finished basements sometimes have wiring that was run without permits and does not match what the rest of the property is doing. A diagnostic call is the fastest way to find out what is actually there.
It can often be staged by area or by circuit, depending on the layout of the property and what is driving the rewire. We go over the scope on the call and explain what can be phased and what needs to be done together to keep the system safe and code-compliant between stages.
Not always. A panel replacement and a service upgrade are separate things. The panel is the distribution equipment inside the home. The service is the supply coming in from the utility. Sometimes only the panel needs to be replaced. Other times the incoming service is undersized and both need attention. We assess both during the initial evaluation.
It can. Older properties may have wiring methods or panel types that need more careful assessment before a quote is confirmed. That might mean a site visit before the final scope is set, or it might mean the electrician identifies something on arrival that changes the conversation. We tell you that upfront rather than after the work is done.
Permit requirements depend on the type of work and where it falls under local and state code. Panel replacements, service upgrades, and new circuit work typically require a permit and inspection. Straightforward repairs and device replacements often do not. We confirm what applies to your specific job before anything is scheduled, and we handle the permit process when it is required.
Records of the work done, including what was installed, what was repaired, and what permits were pulled, are kept on file. If you need documentation for an inspection, a sale, or an insurance inquiry, call (385) 452-6995 and we can go over what is available for your property.
On larger jobs that involve bringing equipment in and making multiple trips, having a vehicle parked reasonably close to the entry point saves time. If parking at the property is restricted or difficult, mentioning it when you call helps us plan the visit so the job stays on schedule.
Yes. When you call, we go over what you are describing, explain what the work typically involves, and give you a rate before anything is scheduled. There is no obligation to move forward until you are comfortable with the scope and the cost.
Oscar's Electric serves Draper and Salt Lake County with the full range of residential and commercial electrical work. When you call (385) 452-6995, we will ask what you are dealing with, where in the property it is happening, and whether it is a repair or a new installation. By the end of that call, you will have a rate, an answer on same-day availability, and a clear picture of what the visit involves. We are open every day from 5:00 AM to 8:30 PM. Book today. Wired tomorrow. Done by the weekend.
We also take work in: Sandy, Lehi, South Jordan.
View our coverage map.
We handle the full range of electrical work for homes and businesses across Draper and Salt Lake County, from a tripped breaker or dead outlet to a full panel upgrade or generator hookup. The table below breaks down what each service covers, who it fits best, and what is worth knowing before you call. Same-day service is often available, and we are open every day from 5:00 AM to 8:30 PM. Call (385) 452-6995 to get a quote on any of the services listed here.
| Type of Work | Scope of Work | When You Need It | Things to Know |
|---|---|---|---|
| Backup Generator Installation |
| Homeowners and businesses in Salt Lake County who need power during winter outages | A transfer switch is required. Without one, backfeeding power into the grid is a serious hazard for utility workers and your own equipment. |
| Whole-Home Surge Protection |
| Homes with smart devices, home offices, or expensive appliances worth protecting | A single surge event can damage refrigerators, HVAC controls, and anything else plugged in. Panel-level protection catches spikes before they reach your devices. |
| Heat Tape Installation |
| Draper homes with exposed pipes in garages, crawl spaces, or exterior walls | Heat tape on an improperly wired or overloaded circuit is a genuine fire hazard. The electrical side has to be done right. |
| Outlet & Switch Installation |
| Homeowners adding outlets, upgrading kitchens or baths, or replacing worn receptacles | GFCI protection is required by code in kitchens, bathrooms, garages, and outdoor areas. We install to current code on every job. |
| Breaker & Fuse Repair |
| Homes with frequently tripping breakers or older fuse-based panels | A breaker that trips repeatedly under normal load is a symptom, not just an annoyance. We find out what is causing it. |
| Dedicated Appliance Circuits |
| Anyone adding a major appliance or workshop equipment that needs its own circuit | Running a heavy appliance on a shared circuit causes repeated trips and wears out wiring faster than it should. |
| Electrical Repairs & Troubleshooting |
| Any homeowner or business with an unexplained electrical problem | We diagnose before we repair, tracing the actual source rather than swapping parts at random. |
| Ceiling Fan Installation |
| Bedrooms, living rooms, and covered outdoor spaces | Ceiling fans require a rated electrical box. We confirm the box is correct before the fan goes up. |
| Electrical Safety Inspections |
| Buyers, landlords, property managers, and anyone whose carrier requires documentation | When an inspection turns up problems, we handle the remediation as well. Permit work is part of the process when the job requires it. |
| Wiring & Circuit Installation |
| Older homes with outdated wiring, remodels that open walls, and any project adding new circuits | Knob-and-tube and deteriorated aluminum branch circuits do not meet current code and carry real safety risks. We assess and explain the options before quoting. |
| Electrical Panel & Service Upgrades |
| Older homes being remodeled, homes adding EV chargers, or any property where breakers trip too often | Licensed electricians pull the permits, do the work to code, and see it through inspection. Permit work is part of the job. |
| Lighting Installation |
| Homeowners updating interior or exterior lighting, and businesses upgrading to efficient fixtures | We run new wiring where needed rather than just swapping fixtures, so the result is safe and up to code. |
Call (385) 452-6995 to talk through any of these services, get a quote, or schedule an appointment. We are available every day from 5:00 AM to 8:30 PM.
(385) 452-6995